Concrete Barrier Block Fire Walls
We use Stacablocs for the construction of concrete barrier block fire walls because they are wider than Virtabloc and allow the wall to be built higher.
We use our Geo concrete mix as the geopolymer characteristics perform better in very high temperatures. In general terms concrete does not burn and can protect other structures from fires caused by inflammatory materials such as tyres, chemicals, fuels any many other materials.
Class A1 fire resistant
Class A1 fire resistant in accordance with clause 22.214.171.124 of EN 13369.
Concrete does not burn and therefore cannot contribute to a breakout and the spread of fire or add to the fire load. As concrete cannot burn it does not emit smoke, gases or any toxic fumes when affected by fire.
All building materials have been classified in terms of their reaction to fire and their resistance to fire, which will determine whether or not a material can be used and when additional fire protection needs to be applied to it. Based on the European Construction Products Directive, EN 13501–1: 2002: Fire classification of construction products and building elements classifies materials into seven grades with the designations, A1, A2, B, C, D, E and F, according to their reaction to fire.
Concrete is a very effective fire shield. The mass of concrete confers a high heat storage capacity. Also its porous structure provides a low rate of temperature rise across a section. These properties result in a low rate of temperature rise that enables concrete to act as an effective fire shield.
Due to the low rate of increase of temperature through the cross section of a concrete element, internal zones do not reach the same high temperatures as a surface exposed to flames.
Even after a prolonged period, the internal temperature of concrete remains relatively low; this enables it to retain structural capacity and fire shielding properties as a separating element.
We Can Design Your Project For You
We offer a full design service from simply working out how many blocks you require for your project to full design including drawings and calculations.
Our full design service can include:
- Planning applications
- Structural engineering design and calculations
- 2D and 3D CAD drawings and BIM models
- Building regulation applications
- Full project management services
To select the correct block for your project go to our product page. Once you are their select the block you think you need and learn a little more. If you need any help click on the call back button above or call the number below during normal business hours. We are here to give advise and support.
CALL 0800 880 3135
Call today and tell us about your project. We can then design it and give you the quantities of blocks you require together with a quotation. We supply all the method and risk assessments and COSHH data sheets for installation. Opening hours from 9am to 5pm Monday to Friday (except bank holidays).